Small parts with an important function.
Connectors, housings and electrical components combine insulating properties and precise geometry. Wall thickness, heat during operation and assembly conditions are part of the application.
Electrical and electronics.
Engineering plastics and functional compounds for housings, connectors and electronic components. Insulation, temperature and geometry guide selection.
The material behind a reliable component.
Explore the application you need a material for. Both the service conditions and the manufacturing process shape the choice.
Materials in practice.
Functional possibilities of the compound.
Colour, surface and ESD characteristics can complement a material’s basic properties. Shrinkage, moisture and fire behaviour are considered for the specific grade and component.
Materials selected for the application.
Product families for the applications shown. Select an application to explore the materials.
Connectors and terminalsPolyamide 6 (PA6)
Unfilled, reinforced and modified compounds.
Polyamide 66 (PA66)
Compounds for different mechanical and temperature requirements.
PBT compounds
Reinforced and modified grades for technical applications.
We base our recommendations on both the requirements of the finished product and the technical properties of the material.
All product familiesFrom the product family to the individual grade.
VersalisLLDPE
Clearflex® SH 12
For compounding.
MFR0.25 g/10 min190 °C / 2.16 kg · ISO 1133
VersalisHIPS
Edistir® RK 421Q
Flame-retarded high-impact polystyrene for injection moulding.
MFR17 g/10 min200 °C / 5 kg · ISO 1133
VersalisHIPS
Edistir® RK 441N
Flame-retarded high-impact polystyrene for injection moulding.
MFR10 g/10 min200 °C / 5 kg · ISO 1133
VersalisHIPS
Edistir® RK 451G
Flame-retarded high-impact polystyrene for injection moulding.
MFR5 g/10 min200 °C / 5 kg · ISO 1133
VersalisHIPS
Edistir® RT 441M
High-impact polystyrene for electrical applications.
MFR7.5 g/10 min200 °C / 5 kg · ISO 1133
TosafFR
FR0625SA EU
Flame-retardant masterbatch for injection-moulded ABS electrical parts. 2019 test data: UL 94 V-0 at 1.6 and 3.2 mm, GWIT IEC 60695-2-13 at 850°C and 960°C, and Needle Flame Test IEC 60695-11-5. The stated results apply to the polymer containing the masterbatch; dosage is not published.
Taro Plast S.p.A.PP COMPOUND
HAIPLEN EP10 G2 BA
Polypropylene copolymer 10% glass fibres reinforced chemically coupled, medium low flow.
MFR2 g/10 min230 °C / 2,16 kg · ISO 1133
Taro Plast S.p.A.PP COMPOUND
HAIPLEN EP10 G4 BA
Polypropylene random copolymer 20% glass fibres reinforced chemically coupled, medium low flow.
MFR2 g/10 min230 °C / 2,16 kg · ISO 1133
Taro Plast S.p.A.PP COMPOUND
HAIPLEN EP10 G6 BA
Polypropylene copolymer 30% glass fibres reinforced chemically coupled, medium low flow.
MFR3 g/10 min230 °C / 2,16 kg · ISO 1133
Taro Plast S.p.A.PP COMPOUND
HAIPLEN EP100 T4
Polypropylene copolymer 20% mineral filled, high flow.
MFR20 g/10 min230 °C / 2,16 kg · ISO 1133
Taro Plast S.p.A.PP COMPOUND
HAIPLEN EP30 G4 BA
Polypropylene copolymer 20% glass fibres reinforced chemically coupled to the resin matrix, medium flow, good mechanical properties, good dimensional stability.
MFR6 g/10 min230 °C / 2,16 kg · ISO 1133
Taro Plast S.p.A.PP COMPOUND
HAIPLEN EP30 G6 BA
Polypropylene copolymer 30% glass fibres reinforced chemically coupled to the resin matrix, medium flow, good mechanical properties, good dimensional stability.
MFR6 g/10 min230 °C / 2,16 kg · ISO 1133
Technical knowledge. A practical next step.
Describe the product, the manufacturing process and the service conditions. This is where our work begins.
Tell us about your productNarrowing the selection
We discuss the product family and the properties that matter for your component.
Reviewing the data
We compare your requirements with the available technical information for the specific grade.
Planning the supply
We discuss the required quantity, timing and supply options.